Angebote zu "Technology" (30 Treffer)

Kategorien

Shops

Wypych, George: Handbook of Antiblocking, Relea...
287,29 € *
ggf. zzgl. Versand

Erscheinungsdatum: 10/2010, Medium: Buch, Einband: Gebunden, Titel: Handbook of Antiblocking, Release, and Slip Additives, Auflage: Revised, Autor: Wypych, George, Verlag: CHEMTEC PUB, Sprache: Englisch, Schlagworte: Technology & Industrial Arts // SCIENCE // Chemistry // Industrial & Technical // TECHNOLOGY & ENGINEERING // Materials Science // Textiles & Polymers // Chemie, Rubrik: Chemische Technik, Seiten: 640, Gewicht: 689 gr, Verkäufer: averdo

Anbieter: averdo
Stand: 31.10.2020
Zum Angebot
Nonwoven Fabrics
319,29 € *
ggf. zzgl. Versand

Erscheinungsdatum: 12/2002, Medium: Buch, Einband: Gebunden, Titel: Nonwoven Fabrics, Titelzusatz: Raw Materials, Manufacture, Applications, Characteristics, Redaktion: Albrecht, Wilhelm // Fuchs, Hilmar // Kittelbaum, Walter, Verlag: Wiley VCH Verlag GmbH // Wiley-VCH, Sprache: Englisch, Schlagworte: Chemie // Technik // Werkstoffe // Berufe // Industrie // Chemische Industrie // Arbeitsstoff // Material // Werkstoff // SCIENCE // Chemistry // Industrial & Technical // TECHNOLOGY & ENGINEERING // Textiles & Polymers // Industrielle Chemie und Chemietechnologie, Rubrik: Chemische Technik, Seiten: 750, Abbildungen: 550 Abb., Gewicht: 1373 gr, Verkäufer: averdo

Anbieter: averdo
Stand: 31.10.2020
Zum Angebot
Porous Materials for Carbon Dioxide Capture
110,39 € *
ggf. zzgl. Versand

Erscheinungsdatum: 30.04.2014, Medium: Buch, Einband: Gebunden, Titel: Porous Materials for Carbon Dioxide Capture, Auflage: 2014, Redaktion: Lu, An-Hui // Dai, Sheng, Verlag: Springer-Verlag GmbH // Springer Berlin, Sprache: Englisch, Schlagworte: Katalyse // Katalysator // Biokatalyse // Biokatalysator // Nanotechnologie // Technologie // Polymere // Polymerisation // Chemie // organisch // Organische Chemie // physikalisch // Physik // Physikalische Chemie // Klima // Meteorologie // Witterung // Energie // Erneuerbare Energie // Energiewirtschaft // Regenerative Energie // Erde // Planet // Geowissenschaft // SCIENCE // Chemistry // Industrial & Technical // Energy // Earth Sciences // Meteorology & Climatology // TECHNOLOGY & ENGINEERING // Nanotechnology & MEMS // Textiles & Polymers // Meteorologie und Klimatologie // Klimaforschung // Alternative und erneuerbare Energiequellen und // technik, Rubrik: Wärme- // Energie-, Kraftwerktechnik, Seiten: 245, Abbildungen: 88 schwarz-weiße und 68 farbige Abbildungen, Bibliographie, Herkunft: NIEDERLANDE (NL), Reihe: Green Chemistry and Sustainable Technology, Gewicht: 553 gr, Verkäufer: averdo

Anbieter: averdo
Stand: 31.10.2020
Zum Angebot
Textile Technology (eBook, PDF)
54,12 € *
ggf. zzgl. Versand

Textile Technology is a unique and readable introduction into the field of textile engineering. It is based on an elementary level course focusing on the manufacture (processes and machines) of yarn, fabric, knitwear, nonwovens, braids, reinforcing fabrics, and technical textiles, but also provides technicians and engineers in the textile industry with an up-to-date review of processes and equipment for textile manufacturing. The book covers all processing steps for the manufacturing of textiles, describing materials, processes and machines, finishing, making-up, and recycling. To provide a better understanding of the individual textile processes, each chapter ends with an example describing the respective processing steps for a specific textile product. In addition, current and future development trends are discussed. The second edition is brought up to date with extensive coverage of new developments, such as in the fields of testing, measurement, and simulation. Contents . Raw materials . Yarn production . Fabric production . Knitwear production . Nonwovens production . Braiding processes and machines . Noncrimp fabrics . Textile finishing . Clothing manufacture . Technical textiles . Textile testing . Disposal and recycling . Simulation

Anbieter: buecher
Stand: 31.10.2020
Zum Angebot
Textile Technology (eBook, PDF)
54,12 € *
ggf. zzgl. Versand

Textile Technology is a unique and readable introduction into the field of textile engineering. It is based on an elementary level course focusing on the manufacture (processes and machines) of yarn, fabric, knitwear, nonwovens, braids, reinforcing fabrics, and technical textiles, but also provides technicians and engineers in the textile industry with an up-to-date review of processes and equipment for textile manufacturing. The book covers all processing steps for the manufacturing of textiles, describing materials, processes and machines, finishing, making-up, and recycling. To provide a better understanding of the individual textile processes, each chapter ends with an example describing the respective processing steps for a specific textile product. In addition, current and future development trends are discussed. The second edition is brought up to date with extensive coverage of new developments, such as in the fields of testing, measurement, and simulation. Contents . Raw materials . Yarn production . Fabric production . Knitwear production . Nonwovens production . Braiding processes and machines . Noncrimp fabrics . Textile finishing . Clothing manufacture . Technical textiles . Textile testing . Disposal and recycling . Simulation

Anbieter: buecher
Stand: 31.10.2020
Zum Angebot
Potential, System Analysis and Preliminary Desi...
39,00 € *
ggf. zzgl. Versand

The industrial sector is very promising for the use of solar thermal technology, since it accounts for a large share of the total final energy consumption (e.g. 27 % in Germany in 2010) and it predominantly uses the consumed energy as thermal energy (74 % in Germany in 2010). In order to develop this area of application, it is necessary to understand which industrial sectors have the highest potential, which processes within these sectors are most suitable for the integration of solar heat as well as to quantify the possible contribution to the industrial heat demand. For this thesis, the industrial heat consumption in Germany is analyzed, which leads to the selection of the 11 most promising sectors within industry. These are Chemicals, Food and beverages, Motor vehicles, Paper, Fabricated metal, Machinery and equipment, Rubber and plastic, Electrical equipment, Textiles, Printing and Wood. The theoretical potential of solar heat for industrial processes below 300 °C in Germany adds up to 134 TWh per year, the technical potential (considering efficiency measures, limited roof area and a solar fraction) being 16 TWh per year or 3.4 % of the overall industrial heat demand.Solar thermal systems can achieve higher system yields in industrial applications compared to domestic ones. At the same time, systems can be more complex in industrial applications. In order to design and operate solar process heat systems efficiently and to exploit the large potential, possible faults of such systems and their impact have to be evaluated. In this thesis, an implemented solar process heat system is methodically analyzed based on measurements and simulations with a validated model. Several faults are identified and their influence, as well as the influence of a reduced load on the system yield is evaluated. The analysis shows that a reduced load is most influential. Further, the most important impact factors on the system performance are identified: the collector parameters (?0, a1) and load characteristics (mass flow, temperature). The design of solar process heat systems is in many cases very demanding, hence costly. This high effort is a major barrier for a further development of solar heat for industrial applications. The decision to install solar thermal systems is in most cases based on solar heat generation cost. Collector field and heat store size are the most important figures for the estimation of the overall cost of a solar thermal system. Therefore, a simple approach for dimensioning the collector field and heat store is developed in this thesis in order to enable manufacturers and planners on one hand and costumers on the other hand to make a decision in favor or against a solar process heat system. In addition to investment cost, the specific system yield, which is determined for selected process heat applications in this thesis, is necessary to calculate solar heat generation cost. Finally, indications on the necessary accuracy of the load profile are provided to help to reduce effort in the design phase.

Anbieter: Dodax
Stand: 31.10.2020
Zum Angebot
Advances in Braiding Technology
319,90 € *
ggf. zzgl. Versand

Braiding is the process of interlacing three or more threads or yarns in a diagonal direction to the product axis in order to obtain thicker, wider or stronger textiles or, in the case of overbraiding, in order to cover a profile. Braids are becoming the reinforcement of choice in composite manufacturing, and have found a range of technical applications in fields including medicine, candles, transport and aerospace. Building on the information provided in Prof. Kyosev's previous book, Braiding Technology for Textiles, this important title covers advanced technologies and new developments for the manufacture, applications and modelling of braided products. Part One covers the braiding of three-dimensional profiles, and includes a detailed overview of three-dimensional braiding technologies as well as chapters devoted to specific kinds of 3D braiding. Part Two addresses specialist braiding techniques and applications, and includes chapters reviewing the use of braids for medical textiles and candles. Part Three focuses on braiding techniques for ropes and Part Four reviews braiding for composites. The final part of the book considers modelling and simulation, and covers topics including overbraiding simulation, Finite Element Method (FEM) modelling and geometrical modelling. Covers advanced braiding techniques, technical applications, and modelling and simulation of braided textiles.Focused on the needs of the textile industry by offering suitable breadth and depth of coverage of a range of braiding manufacturing technology, applications and modelling techniques in a single volume.Written by an eminent team of authors, composed of leading scientists and developers in the field who have a wealth of relevant, first-hand experience in braiding, and edited by a high-profile editor who is an expert in his field.

Anbieter: Dodax
Stand: 31.10.2020
Zum Angebot
Smart Design
192,59 € *
ggf. zzgl. Versand

Good product designs merge materials, technology and hardware into a unified user experience, one where the technology recedes into the background and people benefit from the capabilities and experiences available. By focusing on functional gain, critical awareness and emotive connection, even the most multifaceted and complex technology can be made to feel straightforward and become an integral part of daily life. Researchers, designers and developers must understand how to progress or appropriate the right technical and human knowledge to inform their innovations. The 1st International Smart Design conference provides a timely forum and brings together researchers and practitioners to discuss issues, identify challenges and future directions, and share their R&D findings and experiences in the areas of design, materials and technology.This proceedings of the 1 st Smart Design conference held at Nottingham Trent University in November 2011 includes summaries of the talks given on topics ranging from intelligent textiles design to pharmaceutical packaging to the impact of social and emotional factors on design choices with the aim of informing and inspiring future application and development of smart design.

Anbieter: Dodax
Stand: 31.10.2020
Zum Angebot
Textile Reinforcement of Elastomers
93,08 € *
ggf. zzgl. Versand

The technical importance of flexible composite structures needs no emphasis nor has there been any lack of material descriptive of their manufacture or properties. The starting points of such descriptions have invariably been from the viewpoint of the rubber industry and the presence of a suitable textile has been taken for granted, its strength properties indicated and the technological content confined to the manufacturing process within the rubber industry. An attempt is made here to work from the textile outwards. Industrial fabrics are far heavier than garment textiles, are not produced in the same bulk quantities and need to be specially constructed to provide the balance of properties which will combine with those of the rubber to give the final. product. The most important composite structure formed from textiles and rubber is, of course, the pneumatic tyre. It may therefore seem strange that no chapter deals with this. The reason is quite simple. To deal with the structure and design of the pneumatic tyre in a similar depth of detail as is done here for conveyor or power transmission belting, or hose, would require disproportionate space, in fact, a second volume equal in size to the present one. This book discusses from the textile viewpoint the various reinforced rubber structures used industrially with the exception of the tyre. These other uses of industrial fabrics can be discussed in adequate detail and cover the whole range of the technology involved in the space available in the one volume.

Anbieter: Dodax
Stand: 31.10.2020
Zum Angebot